We photograph every job we do. We write them up here, with the homeowner's or client's permission and without their address, so you can see what the work involves. From single homes to programmes of 13 properties at once.
A homeowner paid another company to remove spray foam. They left the job incomplete and abandoned debris in the loft. We cleared it fully and re-insulated to 270mm.
Large in-roof solar installation with a Sigenergy battery system on a 1970s semi-detached. The customer now generates the majority of their electricity and exports surplus via the Smart Export Guarantee.
Failed 1990s polystyrene bead insulation extracted using our own Extract Vac machines, walls dried and inspected, then fully re-insulated with ThermaBead EPS bead. The customer reported a significant improvement in warmth within days.
OZEV-approved 7kW smart home EV charger installed alongside an existing solar PV system. The smart charger automatically diverts surplus solar generation to charge the vehicle, reducing charging costs to near zero on sunny days.
Loft insulation upgraded from an inadequate 50mm to the full recommended 270mm depth, with raised loft boarding installed above the insulation to preserve the family's storage space. A new loft ladder and light were fitted at the same time.
4kW solar installation on a terraced property with a GivEnergy 9.5kWh battery. Sized to maximise self-consumption for a household with high evening usage. Installation completed in a single day with no disruption to neighbours.
ThermaBead EPS bead insulation installed in a 2005 detached property that had never been insulated. Post-installation thermal imaging confirmed full cavity coverage with no cold bridges.
Old compressed fibreglass insulation removed and disposed of responsibly, loft space cleaned and inspected, then re-insulated with 270mm modern mineral wool. The old material had settled to just 30mm — the customer had cold upstairs rooms despite thinking they had insulation.
Solar PV and Growatt SPH 5000 battery installed for a retired couple looking to reduce fixed-income energy costs. Funded under the Warm Homes Plan. The couple now generate and store enough electricity to cover most of their daily usage.
Two 7kW OZEV-approved smart chargers installed in a double garage for a household with two electric vehicles. Load balancing configured so both cars can charge simultaneously without tripping the main supply.
Cavity wall extraction and ThermaBead refill, solar PV, battery storage and heat pump on a Gosport home. The EPC rating went from E to a high A — one of the biggest jumps a home can make.
Failed fibre insulation extracted from a block of eight flats. 318m² of wall area surveyed with a borescope, rubble cleared, cavities refilled. Worked alongside the main contractor and met the council surveyor on site.
Failed fibre extracted, around 150 spalled bricks replaced, Stormdry applied, and loft upgraded to 300mm on an occupied council semi. Fixing the wall before refilling is what makes the new insulation last.
Thirteen homes with failed cavity wall insulation extracted, ThermaBead refilled, and lofts upgraded to 400mm in September 2025. Full rubble clearance on every property where the borescope showed it was needed.
A local builder found damp patches during repointing work. Rod-camera survey showed urea-formaldehyde foam bridging moisture from outer to inner wall. We extracted it, cleared the rubble and refilled.
A large house with 150m² of failed foam cavity insulation. We extracted it all, cleared the rubble, and refilled with ThermaBead bonded beads. The rear extension was surveyed and excluded — we only quoted for the walls that needed it.
A tall Southsea terrace with 130m² of wet fibre insulation and rubble in the cavity. We extracted and refilled, identified a single-skin gable section that could not be filled, and flagged brickwork repairs the customer needed to know about.
Borescope survey found vegetation growing inside the cavity of a rented property. 112m² extracted, cavity cleaned, Dry Rod DPC injected, gable bricks replaced, ThermaBead refilled. Arranged through the letting agent with tenants kept informed throughout.
Old flattened loft insulation removed, 300mm of new insulation fitted, and 16m² of raised loft boarding built on legs so the insulation keeps its full depth. Storage and warmth — not a compromise.
A couple who had just moved into a four-bed semi found only 100mm of old insulation in the loft. We replaced it and fitted boarding for storage. Moving in is the best time to sort the loft, before it fills up with boxes.
Book a free survey. We will show you what is in your walls or loft and tell you what we would do.
